|
|
|
|
Diagnostic Imaging.
No. 11
Digital mammography: CR and tomo could change game
Throughput, price, and spector of obsolescence muddy competitive waters
November 1, 2008
Full-field digital mammography was built on solid-state technology. The first such machines, introduced eight years ago, were based on flat-panel detectors, a tradition that continued until the commercial introduction of computed radiography a few years ago. These CR-based products work with the generators, x-ray tubes, and stands now being used in film mammography. The addition of high-resolution phosphor-based plates and a plate reader are all that any current mammography facility needs to go digital. But there are issues. - Throughput, throughput, throughput. Ask users of flatpanel FFDM about the advantages of their systems, and one is sure to be increased productivity. More patients can be examined because the images are acquired and displayed in moments. CR can't do that.
- A question of price. CR systems don't cost anywhere near as much as flat-panel FFDM systems. The reason is as plain as the film in the machines now used at these sites to perform mammography. The question might then come down to workload, if not for one thing.
- The fear of obsolescence. CR plates cannot perform tomosynthesis. Only digital flat panels can gather the volumetric data needed for the 3D analyses that developers of tomo products are preparing to deliver. The key question here is when this obsolescence will occur. Commercial products capable of tomosynthesis may be months or even years away. None is yet on the U.S. market. Even when they do become available, thirdparty payers will likely demand evidence of these machines' clinical value before reimbursing for their use. And that could add months or years more.
—By Greg Freiherr
RSNA preview: Focus sessions explore imaging controversies
November 20, 2008
You can tell by the titles of special focus sessions planned for the 2008 RSNA that program committee chair Dr. Robert M. Quencer sees an opportunity to use the sessions to examine tough issues affecting clinical imaging practice.
RSNA preview: CAD improves detection of pulmonary embolisms
November 20, 2008
Computer-aided detection significantly improves the sensitivity of pulmonary embolism imaging, according to a study that will be presented at the 2008 RSNA meeting. Other studies show that specially developed CAD schemes can detect flat lesions that are often missed in CT colonography.
RSNA preview: Cancer specialists voice mixed feelings about oncology imaging
November 20, 2008
RSNA presentations on prostate cancer staging and treatment, along with talks on radiation therapy for thoracic malignancies, have piqued the interest of cancer care specialists. But in general, oncologists and radiation oncologists conveyed some reservations about this year’s offerings in oncologic imaging and therapies.
RSNA preview: Scientific sessions expand limits of imaging diagnosis and guidance
November 20, 2008
There is nothing like a little momentum to help the RSNA organizers present the latest developments in imaging research in the meeting’s scientific sessions. Everyone associated with imaging sciences from Beijing to New York City understands that presenting research in Chicago is an essential requirement for membership in this unique community.
Tech advisor CT vendors plot strategies for growth
November 1, 2008
CT vendors have diverged this year as never before, choosing technological paths to new generations of scanners that reflect their own particular engineering strengths and history of R&D. Core developments by each have translated into novel capabilities. Software and mechanical fixes have countered weaknesses.
CR prepares to challenge solid-state digital mammo
November 1, 2008
Since full-field mammography
started going digital eight years
ago, systems based on flat-panel
arrays have dominated. But computed
radiography has begun seeping into
that market and, if the FDA allows
CR companies to apply for streamlined
510(k) approval of mammography
upgrades, the trickle of CR products
could turn into a flood.
Vendors polish advanced apps with 3T platforms
November 1, 2008
MR vendors have been chipping away at new clinical applications for years. They have pointed to 3T as the means to expand routine practice in ways that are not routine, adding computing engines to handle the massive volumes of data that would gush forth, expanding data pipelines, building out coils with extended channels—in short, creating the infrastructure to support a new diagnostic order. This year, they mean business.
Digital mammography: CR and tomo could change game
November 1, 2008
Full-field digital mammography was built on solid-state technology.
The first such machines, introduced eight years ago,
were based on flat-panel detectors, a tradition that continued
until the commercial introduction of computed radiography a
few years ago.
|
|
|
|
|
|
|